When it comes to traditional firestopping methods, you never stop paying. You pay to put it in and every time you make cable changes, you do it again. The more changes you make, the more it costs you both in time and money… Not to mention disruption!
Firestopping is No Longer the Problem with he Only Truly Automatic Firestop System!
EZ-Path® customers benefit from greatly enhanced cable management. The EZ-Path® System allows cable installations to be easily organized by type, use, or trade… Or any other way that you might like to do it. Pathways installed in walls provide managed portals through which cables can easily be routed.
To ensure your firestop installation is a success, simply follow the steps below:
1. Define the type and number of modules in accordance with the number of cables (see table below ).
2. Identify the type of installation: thin partition, concrete wall, concrete floor, etc.
3.1. Check the existing framework.
3.2. If there is none, select suitable tools for the material involved (saw, crown saw or a diamond coring system) and
make an opening.
4. Select finishing plates with the help of the tables below.
| Module 22 | Cat. N° | Code | Kit |
Dry partitions Sawn framework 0 Coring with crown saw |
Concrete wall Framework 0 Coring |
Cables already in place |
|---|---|---|---|---|---|---|
 |
EZDP 22 |
250518 |
Only sold as a kit with a module + 2 plates |
 45X45 mm 52 mm |
45X45 mm |
 |
Please note! Not all steel wire cable trays are the same. The mechanical and electrical characteristics, tests, certifications, overall quality management aspects and recommendations referred to in this technical guide are relevant to CABLOFIL® only and cannot, under any circumstances, be applied to other similar or imitation products.
|
of cables (mm) |
|||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 3.5 | 4.5 | 5.5 | 6 | 7.5 | 8 | 10 | 14 | 16 | 18 | 21 | 22 | 24 | 26 | 29 | 32 | 38 | 48 | 60 | 70 | 75 | |
| Modules | Maximum number of cables | ||||||||||||||||||||
| EZDP22 | 58 | 30 | 20 | 17 | 11 | 10 | 6 | 3 | |||||||||||||
The table above provides an estimate of the maximum number of cables that each module can accommodate.
* Within the context of renovation work, if cables are already in place in the duct, modules can be caulked directly into the wall.
Links:
[1] http://www.ezpath-solution.com/print/252
[2] http://www.ezpath-solution.com/?q=ezd-22
[3] http://www.ezpath-solution.com/?q=ezd-33
[4] http://www.ezpath-solution.com/?q=ezd-44
